Please give me part number of humidity sensor in ir 3300 and ir 3035.
Where is it placed in the machine.
Where is it placed in the machine.
-
-
Re: Humidity sensor
-----------------------------------------------------------------------------------
u mean the Environment Sensor (humidityhumidity,
between 5% and 80%.
iR3300 Series
in service mode>>>>>>>>>>COPIER>OPTION>BODY
>HUM-SW
Use it to enable or disable the environment sensor.
Settings
0: auto control by environment sensor
1: fixed mode (for high humidity)
2: fixed mode (for normal humidity)
3: fixed mode (for low humidity)
(In 1, 2, or 3, the move of control does not depend on the environment
sensor.)
Environment Sensor.JPG
SCREWED ON DEVELOPING FAN ASSEMBLY FM1
FH7-7559-000
S3.JPG**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: Humidity sensor
====================
for iR3035 SERIES
Operating environment (humidity range) 25% to 75%
Environment Sensor
it is HU1
Environment Sensor H1.JPG
FK2-0160-000
machine front plate location
HUM-SW Changing the charge output setting by humidity sensor
LEVEL 2 ---IN SERVICE MODE---
COPIER > OPTION > BODY>HUM-SW
<Setting range>
0: Automatic control by humidity sensor [Default]
1 to 5: Fixed environment and deemed control corresponding to the
parameters of charging, development, and transfer**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
Comment