[Misc] Use collate option in Ir1600

[Guna]

Hello
Can any one assist me to how I can use the collate option in IR1600 with glass copying with out ADF.....
Regards Guna

[teckat]

Re: Use collate option in Ir1600

Hello
Can any one assist me to how I can use the collate option in IR1600 with glass copying with out ADF.....
Regards Guna

===========;

Scan glass originals into memory> select collate>print

The available sorting features of the imageRUNNER 1600 / 2000 / 2010F when copying off the glass


Unlike analog machines which use a 'Sorter Unit' or a 'Stapler Sorter Unit' in order to separate sets of copied output into a number of trays, digital machines such as the imageRUNNER 1600 / 2000 / 2010F will be able to store the originals into its memory and sort the originals into collated sets of copies.

These machines will be restricted to perform certain sorts depending on the configuration of the machine. With either the stand-alone unit with no optional accessories or with just the Inner 2-Way Tray-B1 installed, the user will be able to output rotated sets of copies or prints when the papers in the drawers are aligned correctly.

With the Finisher-L1 installed, additional sorting features are available for the imageRUNNER 1600 / 2000 / 2010F units that include outputting shifted sets or stapled sets of copies or prints. These are convenient features allowing the user to distinctly separate sets of copies or prints for easier distribution of documents.

The chart below shows the sorting features available with the different configurations of the imageRUNNER 1600 / 2000 / 2010F.

Optional Units	Collate	Rotate	Offset Collate	Staple
None	Available	Available
Inner 2-way Tray-B1	Available	Available
Finisher-L1			Available	Available

[cokwax]

Re: Use collate option in Ir1600

Hello
Can any one assist me to how I can use the collate option in IR1600 with glass copying with out ADF.....
Regards Guna

There is a Collate button on IR1600 on control panel. One of the buttons on the left hand side of the display. Depending on your control panel type, It may just be marked with a collate symbol.

[teckat]

Re: Use collate option in Ir1600

Scan glass originals into memory> select collate>print

should be obvious to anyone looking at this control panel
already posted operation--------------


Collate key
Press to turn ON/OFF the finisher functions, such as Collate or Rotate. If the optional Finisher-L1 is attached, you can also select the stapler function.

CP.JPG

[Guna]

Re: Use collate option in Ir1600

The machine has not this type of control penal and not equipped with finisher unit.It is just a simplex one.Any option to change in service-mode to use the collate option.
Thanks
Guna

[teckat]

Re: Use collate option in Ir1600

The machine has not this type of control penal and not equipped with finisher unit.It is just a simplex one.Any option to change in service-mode to use the collate option.
Thanks
Guna

----------------------------------
ALL imageRUNNER 1600/2000 Series can store originals into its memory and sort them into collated sets of copies.

If you or someone else installed an Inner 2-Way Tray-B1- the Collate option will not be available


inner.JPG1600.JPG