[Misc] IR 3235N stop printing

[mido]

Hi all,
The IR 3235N stop printing after I cleared the DC-CON & MMI.
The bootrom becomes 01.20.
Please I need your help about this problem

thank you

[elamurugu]

Re: IR 3235N stop printing

cheak the machine ip add

[mido]

IP added

when clearing dc con & mmi, the ip address will lost. I know this point & added new ip address & subnet mask.
before clear that. the bootrom was 01.20_N.
but now it is 01.20_ . without N.
can you tell why the bootrom changed???
thank you

[teckat]

Re: IP added

when clearing dc con & mmi, the ip address will lost. I know this point & added new ip address & subnet mask.
before clear that. the bootrom was 01.20_N.
but now it is 01.20_ . without N.
can you tell why the bootrom changed???
thank you

----------------------------
did u put back DCon settings

Copier > Option > INT-FACE (1/2)
IMG-CONT_iR3225.JPG
IMG-CONT 2_iR3225.JPG
IMG-CONT 3_iR3225.JPG
IMG-CONT 4_iR3225.JPG

[teckat]

Re: IP added

when clearing dc con & mmi, the ip address will lost. I know this point & added new ip address & subnet mask.
before clear that. the bootrom was 01.20_N.
but now it is 01.20_ . without N.
can you tell why the bootrom changed???
thank you

=================================
Also check under
Additional Functions>System Settings>Network Settings>TCP/IP Settings>Multicast Discovery>set to "OFF".

[mido]

i checked all the setting as you told me but nothing changed. there is a reply from the ethernet of the machine. but no printing

[mido]

i clear again the following:
dc con
mmi
mn con
now the IR3235 printing


thank you