iR2200-3300 HDD Change

[mitsubee]

Hello everyone,

I need some tutorial on how to change new HDD to a ir3300 machine successfully.

Recently i have change a new HDD,i understand that each time we change a HDD on ir3300 we need to upload the boot system lang etc.

this is the main thing i`m asking for a little help from pro's out here.

First i need help for the correct procedures on uploading softwares into the HDD.

Second : it`s a new HDD using the ON+2-8 Download Mode with Parreral Cable is the only way ?

Third : by using Norton Ghost 2003 to clone the HDD from a working HDD to a new one is also one of a solutions?

Please help me out very much appreciate it.

Thanks you

[Dalamar]

1. install new hdd
2. fire up service support tools and select model of copier
3. select hd format
4. turn machine on in download mode (press 2 & 8 when turning on)
5. follow prompts to refire machine
6. select the other software in the list to upload
7. repeat steps 4 trough 6 as needed
8. put machine back together
9. ?????
10. Profit!

never tried ghosting from other machine, always was easier to just install the system software

[linuxxpwin]

Software have been updated for IR3300 So I would suggest using updated version of the system software.

Ir2200 and 3300 same machine software.

Linuxxpwin

[mitsubee]

Dear brother Dalamar ,

That is what i have tried , but after the reboot of the machine... straight away error with Black Background e000602-0003 appear...hope u can correct my mistake if any

thanks

[mitsubee]

Dear brother Dalamar ,

That is what i have tried , but after the reboot of the machine... straight away error with Black Background e000602-0003 appear...hope u can correct my mistake if any

thanks