Change new hdd. Then up e602-002

[spectraindo]

Re: Change new hdd. Then up e602-002

Replacing the Hard Disk on IR7095 is not as easy as 123.
First you must know the version of the Bootrom is it V-1 or V-2, then choose the right System Software.
You can find it on a previously printed P-PRINT.
Register the System software in the SST and Download to the machine.

[teckat]

Re: Change new hdd. Then up e602-002

After Replacing the Hard Disk:
1) Formatting the HDD:
Start up the machine in safe mode (i.e., turn on the main power while holding down the 2 and 8 keys).
Using the HD formatting function of the SST, execute full partition formatting.
2) Downloading the System Software:
Using the SST, download the following: System, LANG, RUI, PS-FONT, OCR dictionary, SSL encryption key, SSL CA certificate, MEAP content.
3) Execute the following service mode item:
COPIER > FUNCTION > CLEAR > CA-KEY (Level 2)
4) Turn off and then on the power.

============================================

already know that/

other poster said otherwise

[laitang]

Re: Change new hdd. Then up e602-002

After Replacing the Hard Disk:
1) Formatting the HDD:
Start up the machine in safe mode (i.e., turn on the main power while holding down the 2 and 8 keys).
Using the HD formatting function of the SST, execute full partition formatting.
2) Downloading the System Software:
Using the SST, download the following: System, LANG, RUI, PS-FONT, OCR dictionary, SSL encryption key, SSL CA certificate, MEAP content.
3) Execute the following service mode item:
COPIER > FUNCTION > CLEAR > CA-KEY (Level 2)
4) Turn off and then on the power.

[teckat]

Re: Change new hdd. Then up e602-002

You do not need SST to install a HDD

===================================


How do u then format the NEW HDD with the HDFormat.ift file/ then load printer firmware

if your talking about cloning/ take it somewhere else

[MFPTech]

Re: Change new hdd. Then up e602-002

-----------------------------
no mind readers here[ATTACH=CONFIG]26025[/ATTACH]

do u have Models Firmware loaded into SST ?

1-PRINTER Model ?
2-is HDD the correct one for your model ?
3-did u first format new HDD using SST Program
4-Are u a trained tech

You do not need SST to install a HDD

[teckat]

Re: Change new hdd. Then up e602-002

Change new hdd. Then up e602-002 ir7095

-----------------------------
no mind readers heremind-reader real.jpg

do u have Models Firmware loaded into SST ?

1-PRINTER Model ?
2-is HDD the correct one for your model ?
3-did u first format new HDD using SST Program
4-Are u a trained tech

[mramlawi]

Re: Change new hdd. Then up e602-002

Did you install the system software on it !!?

[freefly]

Change new hdd. Then up e602-002 ir7095