IRC5185 repear HDD

[teckat]

Re: IRC5185 repear HDD

"settings with *1 have no use for you" who can use, why not I
I want to know ALL SETTINGS which are available to me and service engineers. what else there are combinations of keys and what hidden menus are ??

*1 == meaningless / thats' why it's not shown

Point is to Keep Records of Paid Options with customer (stored online, & on paper, and with printer, and on a removable drive )
Customer is actually responsible for those records, (needed when calling Canon Support)

techs have only to worry about other selections when transferring paid options /

have transferred over 350 paid options / without an issue

[gulya]

Re: IRC5185 repear HDD

"settings with *1 have no use for you" who can use, why not I
I want to know ALL SETTINGS which are available to me and service engineers. what else there are combinations of keys and what hidden menus are ??

[teckat]

Re: IRC5185 repear HDD

I know how to enter the level2, but there are no these settings "NOT DISPLAYED IN SERVICE MODE" so is written where they are

settings with *1 have no use for you / disregard

what are u trying to discover


Color imageRUNNER Cxx7x and Cxx8x models.
Basic Universal Send functionality comes standard on these machines.
No Universal Send Kit is required to add basic Universal Send functionality to these models.
Since basic Universal Send is a standard feature on these models, it cannot be transferred from one machine to another.


for other Transfers
Translation errors may occur when the technician copies the transfer key from the imageRUNNER's screen. One major way to reduce these errors is to print the PPrint report after disabling the LMS option. This report will print the physical TRKEY value next to the disabled feature. Having the report handy would make it much easier for the dealer and Canon to complete the LMS license transfer.

[teckat]

Re: IRC5185 repear HDD

I know how to enter the level2, but there are no these settings "NOT DISPLAYED IN SERVICE MODE" so is written where they are

settings with *1 have no use for you / disregard

what are u trying to discover

[gulya]

Re: IRC5185 repear HDD

I know how to enter the level2, but there are no these settings "NOT DISPLAYED IN SERVICE MODE" so is written where they are

[teckat]

Re: IRC5185 repear HDD

[ATTACH=CONFIG]29257[/ATTACH]

where this settings is displayed. How i find it ?

They are under
Service Mode Level 2

u see that over to right side

when in Level 1 > u hit add function key once_then #2 key once> that brings u into LEVEL 2

Don't u have a Manual


L2.jpg

[gulya]

Re: IRC5185 repear HDD

service.jpg

where this settings is displayed. How i find it ?

[teckat]

Re: IRC5185 repear HDD

Above you wrote about UFRII/PCL Printer Kit-N1 I this whale didn't find only UFRII/PCL Printer Kit-N2 and if I buy it on ebay this is a whale will solve my problems. On photos on ebay the box is represented What inside in the box (only one piece of paper with license key) or something else ?

_______:-)

You better make sure that kit has "Never" been opened.

*********** License Management System is a website used to register LANs (License Access Numbers) for Universal Send Kits and other optional kits for the Canon imageRUNNER devices.

To Register a LAN:

1. Using a Web Browser (ex. Internet Explorer) on your PC, go to the LMS website at 301 Moved Permanently.

2. Enter in the LAN provided in the optional kit (ex. Universal Send Kit).


3. Enter the serial number for the imageRUNNER device (the machine that the optional kit will be installed on). BE SURE TO ENTER THE CORRECT SERIAL NUMBER.

4. Copy down the License Key number for the installation.

😎

To Install the Optional Kit on the imageRUNNER Device:

1. On the copier, hit Additional Functions > System Settings > scroll down > License Registration.

2. Enter the License Key number you copied down when registering the LAN on the LMS website.

3. Hit the Start button on the License Registration screen.

4. Reboot the copier.

[gulya]

Re: IRC5185 repear HDD

Above you wrote about UFRII/PCL Printer Kit-N1 I this whale didn't find only UFRII/PCL Printer Kit-N2 and if I buy it on ebay this is a whale will solve my problems. On photos on ebay the box is represented What inside in the box (only one piece of paper with license key) or something else ?

[teckat]

Re: IRC5185 repear HDD

what to do with it to me? how to activate? or install

================================================== ================================

If a key is inadvertently disabled and needs to be re-enabled on the same device, you also need to contact the TSC.
You will be required to have the serial number of the device, the 24-digit Transfer Key disable code and the 16-digit License Access Number (LAN) (License Activation Number from Original Kit) for the LMS option.

if u don't have that LAN # u have a problem.

License # is shown>meaning it was Disabled &
as indicated under > ST-LXUFR and ST-PCL show "0" as not installed /or disabled.

================================================== ================================================== =========================================
Basic Info on License Products

Call the Technical Support Center with the device serial numbers and the 24 number >Transfer License Key.

Make sure you have this number (Transfer License Key) handy when calling the TSC. This number must be provided to ensure that the License was indeed cancelled on the imageRUNNER.

Contact the Technical Support Center at 1-800-528-2830 to transfer a license from one device to another.
You will be required to have the following information:
1. The serial number of the old device.
2. The serial number of the new device. (Verify that this serial number exists in your dealer inventory).
3. The Transfer Key number.To get the Transfer Key number, you will have to disable the license on the old device (see above).
4. The Orginal LAN number (License Activation Number from Original Kit) for that specific option being transfered.


You only need to call the Technical Support Center to transfer the license from one machine to another machine. You do not need to call the Technical Support Center to disable the license on a given machine. Simply follow the procedure above to disable the license on your device. Write down the resulting Transfer Key Number and the serial number of the device that you disabled the license on. Also write down the License Access Number for the kit. Keep this information in a safe place. When you have the serial number for the new device that you want to transfer the kit to, then call the Technical Support Center with all of the above required information. The Technical Support Center staff can then transfer the license in the LMS system and generate a new license key number for your new device.

---

[gulya]

Re: IRC5185 repear HDD

what to do with it to me? how to activate? or install

[gulya]

Re: IRC5185 repear HDD

20150521_121142.jpg20150521_121008.jpg20150521_121019.jpg20150521_121058.jpg20150521_121133.jpg

[gulya]

Re: IRC5185 repear HDD

HD at me, on it too is installed new system and as to me to be registered online, on original HD there is a program???

[teckat]

Re: IRC5185 repear HDD

I replaced the HDD printer bought used, the external rip isn't present. as to me to learn LAN number I on it don't have anything. PDL-FNC1-000000000, COPIER>DISPLAY>VERSION>GDI-UFR--.-- earlier in PDL-FNC1-00001100111, GDI-UFR I showed the version. Now it isn't present anything. printer kit in this printer is the program or a payment. and as to me to learn LAN number
????????

Go into posted above, Level 2 in service mode,
Make sure

Check the LCNS-TR setting under Service Mode Level 2 > Copier > Option. The ST-LXUFR and ST-PCL should be set to '1', if the UFRII/PCL Printer Kit-N1 is installed.

Print UFRII KIT is a cost , comes with a License that is registered with Canon online.

It can be transfered to another, but u need to run the transfer program in printer to get transfer #.

Where is the original HDD_?

[gulya]

Re: IRC5185 repear HDD

I replaced the HDD printer bought used, the external rip isn't present. as to me to learn LAN number I on it don't have anything. PDL-FNC1-000000000, COPIER>DISPLAY>VERSION>GDI-UFR--.-- earlier in PDL-FNC1-00001100111, GDI-UFR I showed the version. Now it isn't present anything. printer kit in this printer is the program or a payment. and as to me to learn LAN number
????????