Re: Load correct paper size Canon ir 2022

[Mukasa]

Hello Guys, Canon ir 2022 makes paper jams in all trays at the drum unit and displays load correct paper size A4. All trays paper sizes set properly.
When try Bypass tray it also make one copy out then displays load correct paper size A4. Changed the Registration Clutch and all feed rollers fro trays 1 and 2.
Godfrey

[Max]

Re: Load correct paper size Canon ir 2022

does it display the correct paper size on the screen?

[teckat]

Re: Load correct paper size Canon ir 2022

Hello Guys, Canon ir 2022 makes paper jams in all trays at the drum unit and displays load correct paper size A4. All trays paper sizes set properly.
When try Bypass tray it also make one copy out then displays load correct paper size A4. Changed the Registration Clutch and all feed rollers fro trays 1 and 2.
Godfrey

-----------------------------------------------------------------------------------------
Delay Jam in Pickup Assembly

The registration sensor cannot detect the leading edge of paper within the jam detection time interval after paper pickup started.

-Registration sensor (SR209)
-Pickup solenoid (SL202)


Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing
Assembly)

Paper Leading Edge Jam at First Delivery Sensor
The first delivery sensor cannot detect presence of paper within the prescribed time after the registration clutch has been turned on.

First delivery sensor (SR203)
Registration clutch (CL203)
-------------------------------------------------------------------------------------------------------------------------------------------------
Stationary Jam in Pickup Assembly
Stationary Jam in Pickup Assembly
The registration sensor does not detect absence of paper within the prescribed time before the next leading edge of fed paper reaches the registration sensor.

-Registration sensor(SR209)

Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam
at First Delivery Sensor)

Paper Trailing Edge Stationary Jam at First Delivery Sensor
The first delivery sensor cannot detect absence of paper within the prescribed time after the registration sensor has been turned off.

-Registration sensor (SR209)
-First delivery sensor (SR203)

Stationary Jam at First Delivery Sensor
The first delivery sensor cannot detect absence of paper within the prescribed time after it has detected the leading edge of paper.

-First delivery sensor (SR203)



when paper is loaded > what sizes are shows on control panel

[Mukasa]

Re: Load correct paper size Canon ir 2022

-----------------------------------------------------------------------------------------
Delay Jam in Pickup Assembly

The registration sensor cannot detect the leading edge of paper within the jam detection time interval after paper pickup started.

-Registration sensor (SR209)
-Pickup solenoid (SL202)


Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing
Assembly)

Paper Leading Edge Jam at First Delivery Sensor
The first delivery sensor cannot detect presence of paper within the prescribed time after the registration clutch has been turned on.

First delivery sensor (SR203)
Registration clutch (CL203)
-------------------------------------------------------------------------------------------------------------------------------------------------
Stationary Jam in Pickup Assembly
Stationary Jam in Pickup Assembly
The registration sensor does not detect absence of paper within the prescribed time before the next leading edge of fed paper reaches the registration sensor.

-Registration sensor(SR209)

Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam
at First Delivery Sensor)

Paper Trailing Edge Stationary Jam at First Delivery Sensor
The first delivery sensor cannot detect absence of paper within the prescribed time after the registration sensor has been turned off.

-Registration sensor (SR209)
-First delivery sensor (SR203)

Stationary Jam at First Delivery Sensor
The first delivery sensor cannot detect absence of paper within the prescribed time after it has detected the leading edge of paper.

-First delivery sensor (SR203)



when paper is loaded > what sizes are shows on control panel

Max, thanks for the information. the paper sizes shown on the control panel is A4.
I have read through all the Stationary Jam at First Delivery Sensor and Registration sensor information, the common sensor here for all the trays is Registration sensor. I replaced this sensor with a new one but it was the same story.

[teckat]

Re: Load correct paper size Canon ir 2022

Max, thanks for the information. the paper sizes shown on the control panel is A4.
I have read through all the Stationary Jam at First Delivery Sensor and Registration sensor information, the common sensor here for all the trays is Registration sensor. I replaced this sensor with a new one but it was the same story.

is issue from Glass copies & Network prints ?
what are the Jam Codes

[Mukasa]

Re: Load correct paper size Canon ir 2022

is issue from Glass copies & Network prints ?
what are the Jam Codes

Hi Teckat,
This machine doesnot print, its not connected to any network but when i printed the error report it was empty sheet with only two dotted straight lines.

No Jamed codes , it only displays " Load correct paper size A4"

[teckat]

Re: Load correct paper size Canon ir 2022

Hi Teckat,
This machine doesnot print, its not connected to any network but when i printed the error report it was empty sheet with only two dotted straight lines.

No Jamed codes , it only displays " Load correct paper size A4"

See pdf link_____Prevention of Incorrect Paper Size Error

https://files.acrobat.com/a/preview/15bef9d5-8b41-49b5-bcc1-fefc50d468d0

Did this just start_?
Did copier ever work properly_?

Is printer set for your region _?

Did u add an extra wrap to the spring for the Registration Sensor (SR209) flag /

Also check the flag for a worn face.(rounded)

[Mukasa]

Re: Load correct paper size Canon ir 2022

See pdf link_____Prevention of Incorrect Paper Size Error

https://files.acrobat.com/a/preview/15bef9d5-8b41-49b5-bcc1-fefc50d468d0

Did this just start_?
Did copier ever work properly_?

Is printer set for your region _?

Did u add an extra wrap to the spring for the Registration Sensor (SR209) flag /

Also check the flag for a worn face.(rounded)

Thanks i managed to clear the massage "Load correct paper size A4" by adding a on the Registration Sensor flag . now the Bypass tray is working ok.

The trays one and two when you press start button they pick papers continuosly causing several jams on the paper path.
I cleaned the feed clutch and the solonoid , the fault didn't clear. Even at power on the machine it fisrt feed out a few papers from the trays.

Godfrey

[Mukasa]

Re: Load paper drawer1and 2 Canon ir 2022

[QUOTE=Mukasa;472644]
Tray 1 and 2 was multifeeding


I replaced tray 1 solenoid and the machine worked ok but after making like 40-50 copies, it displayed "load paper drawer 1"
yet the tray is inside. i looked at the flag of the sensor was ok

I tried power off and on the machine the same message was displayed, i need some help

Godfrey