Canon IRC 2880 Scanning issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tech28
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jun 2013
    • 434
    #1

    Canon IRC 2880 Scanning issue

    Have new customer that would like to know if machine can scan 75-100 documents as 1 scan(know feeder is rated for 50). They scan batches to one location. Is there a way to with this machine? Multiple sets as one? Anyone run into this problem? Suggestions would really be appreciated. Thanks.
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Re: Canon IRC 2880 Scanning issue

      Originally posted by tech28
      Have new customer that would like to know if machine can scan 75-100 documents as 1 scan(know feeder is rated for 50). They scan batches to one location. Is there a way to with this machine? Multiple sets as one? Anyone run into this problem? Suggestions would really be appreciated. Thanks.



      Why don't you just send directly from PC to location_?
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Gazzahos
          Technician
          • May 2014
          • 38
          #3
          Re: Canon IRC 2880 Scanning issue

          Originally posted by teckat
          Why don't you just send directly from PC to location_?

          On all Canon MFD's there is a feature called "Job Build". This will allow the user to load up the DF, run out and load more copies in the DF and add these to the job. This feature will also let you add scans from the Copyboard Glass to the file.

          The key presses to get to this area are.

          SEND (to use the feature)

          Colour /Gray (or whatever type of scan setting you have set as default). This is located on the RHS of the screen just under the scan settings display.

          Option

          Special Features then highlight Job Build to turn it on.
          Last edited by Gazzahos; 06-16-2015, 04:02 AM. Reason: typo

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16092
              #4
              Re: Canon IRC 2880 Scanning issue

              Originally posted by Gazzahos
              On all Canon MFD's there is a feature called "Job Build". This will allow the user to load up the DF, run out and load more copies in the DF and add these to the job. This feature will also let you add scans from the Copyboard Glass to the file.

              The key presses to get to this area are.

              SEND (to use the feature)

              Colour /Gray (or whatever type of scan setting you have set as default). This is located on the RHS of the screen just under the scan settings display.

              Option

              Special Features then highlight Job Build to turn it on.



              Good Info, know about that.

              But don't trust Canon DF's. Especially on this series.


              :-\
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • tech28
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Jun 2013
                  • 434
                  #5
                  Re: Canon IRC 2880 Scanning issue

                  Thank You for that information Gazzahos, as for sending from PC, they get docs that need to get printed, then they get scanned and sent to other agencies. We have been trying various ways top get around this, but to no avail. Now there is a way. Again, Thanks Gazzahos. Have a great day.

                    Comment

                    Previous template Next
                    Working...