Canon İR 3300 network printer problem

[funnestfan]

Hello. I have canon image runner 3300 photocopy machine. Machine is good but network connection doesnt work. Firstly we tried own labtop (win 7 64bits)
machine is worked with network connection. i printed some example pages in own place. However today i try to another place (and another computers(win 7 64bits and win 8 64 bits)) machine didnt worked.
i did lots of options such as ;
tried another network cable,
used dhcp and used manuel ip config.
tried another computer

However connection was okey. ( when i sent ping 192.168.2.125 i got receive message.
i was used driver: Canon PCL5e/5c, PCL6 Printer Driver v14.02
then i entered setup, it was search network machines, then my machine found, add and create port etc. As a result setup was correct. When i printed example page machine didnt printed anythings. This is really interesting problem. I think computers, switches are okey.
what should I do for solving this problem.

[sx633]

Re: Canon İR 3300 network printer problem

Are you sure you had it network printing before ?
These need a boot ROM and system software change to enable printing.
If it is network ready try the Canon UFR driver. It may be that the device is not PCL enabled.

[funnestfan]

Re: Canon İR 3300 network printer problem

Are you sure you had it network printing before ?
These need a boot ROM and system software change to enable printing.
If it is network ready try the Canon UFR driver. It may be that the device is not PCL enabled.

yes i printed some pages on my own labtop(with pcl 5e driver) but another place i didnt print anythings
I never tried ufr driver because ir 2200/3300 have only pcl driver on official canon website.
This is very illogical problem, what is netware ? i seen netware settings important for printing is it true ?

[teckat]

Re: Canon İR 3300 network printer problem

Print out a P PRINT with settings,
Do a
clear R-CON in service mode; Copier>Function>Clear>R-CON
Re-input the R-CON settings from printout.
then test your Network Printing
��
if still issue check the
Multi PDL Kit and Network Dimm

need to check interior , especially the "N" Boot Rom.

[funnestfan]

Re: Canon İR 3300 network printer problem

Now, machine was came back my office, so i tried network connection again. Machine was printed pcl 6.86 (x64) driver with my own computer. However i tried to other computer(desktop), machine didn't worked, i tried to another drivers, machine was worked with ps driver, i was printed 1 test page but machine printed about 10 pages(all words were mixed and faulty)
On the other hand scanner was working fine.
So unfortunately machine doesn't useful for us

[teckat]

Re: Canon İR 3300 network printer problem

Now, machine was came back my office, so i tried network connection again. Machine was printed pcl 6.86 (x64) driver with my own computer. However i tried to other computer(desktop), machine didn't worked, i tried to another drivers, machine was worked with ps driver, i was printed 1 test page but machine printed about 10 pages(all words were mixed and faulty)
On the other hand scanner was working fine.
So unfortunately machine doesn't useful for us

--------------------------------------------------


you are all over the place with this issue-------------

Network printing requires the (Network Multi-PDL Printer Kit-C1) which includes/ Network Dimm & UFR Board
& install of ScanGear -
PDL Support: PCL 5e, PCL 6, PostScript 3 Emulation
Internal Fonts >
PS: 136 Fonts-117 Adobe Type Fonts and 19 True Type
PCL5e/6: Roman 80, Enhanced Barcode 32


can u print out a PCL Configuration Page_ & PS Configuration Page_

-press *Additional Functions
Press [Report Settings]
Press [Printer]
Press [PCL]
Press [Configuration Page]
Press [Yes] to print the page

do same for PS

config pages.jpg

The Configuration Page includes the following information:

-Hardware Configuration
This section displays the hardware configuration of the machine, including any options that have been installed.
-Common Settings
This section displays the common printer settings of the machine, as determined by the Settings menu.
-Paper Feed
This section displays the paper feed settings for the printer function of the machine, as determined by the Paper Feed section of the Settings menu.
-Print Quality
This section displays the print quality settings for the printer function of the machine, as determined by the Print Quality section of the Settings menu.
-Layout
This section displays the layout settings for the printer function of the machine, as determined by the Layout section of the Settings menu.
-PCL Settings
This section displays the PCL settings for the printer function of the machine, as determined by the PCL section of the Settings menu.
-PS Settings
This section displays the PS settings for the printer function of the machine, as determined by the PS section of the Settings menu.