If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Try setting the scan default format to TIFF and B&W, not grey scale, and drop the resolution down to 200 dpi..Had this issue before and this was the format the program needed. Emujo
Thank you! The users finally got to test this out and that solved the problem! You are awesome.
You want to be in the scan screen (mode), find your file type settings, choose TIFF, B&W, and set the DPI. If this works you have 2 choices...Either default the file type to TIFF (every scan will be a TIFF unless the operator selects a different type), or you can set this up as a program button..users would select the program button then send their scans. Emujo
Leave a comment:
Guest replied
Re: C552DS - G4 Compression?
Originally posted by emujo
Try setting the scan default format to TIFF and B&W, not grey scale, and drop the resolution down to 200 dpi..Had this issue before and this was the format the program needed. Emujo
Thank you emujo! I will test this out and let you know if it works!
Try setting the scan default format to TIFF and B&W, not grey scale, and drop the resolution down to 200 dpi..Had this issue before and this was the format the program needed. Emujo
I've got a C552DS which my firm wants to use to scan. The program we are scanning to requires G4 Compression and TIFF scanning. I've poured over the user manual and can't find anywhere to change this setting (either in the web interface or in the printer GUI). I was warned by the software company that this would be a tough setting to find. They were right! I can set compression to "High," but I suspect this isn't what I need to do (especially because it doesn't work).
Do we need to get a new copier or am I (hopefully) just missing something?
Leave a comment: