Problem i found was that 2 of the 4 rubber feet was missing but not noticeable. I carefully lifted the machine with cardboard shims and the problem is finally gone. Will still need to find a better way of offsetting the machine from the table.
-
C35 Tray jams
Had a machine that just did not what to feed paper out of the tray even after replacing the clutches and the tray. The machine would seem to work for a while and the problem would just return
Problem i found was that 2 of the 4 rubber feet was missing but not noticeable. I carefully lifted the machine with cardboard shims and the problem is finally gone. Will still need to find a better way of offsetting the machine from the table.