For an Bizhub 750.
I have not auto toner suply. What i have notice and done:
- door sensor is OK
- in output: i have give SW 1- OK- the toner bottle is turning OK
SW 56-OK- the toner suply motor turns OK
- all the tests are OK-cartridge, gamma 1 and 2, laser and autodensity are OK
- developer, drum -OK - 100 k
There are no codes or warnings.
There are no codes or warnings. Simply the toner bottle doesnt start automaticaly to make the toner suply.
In counters> except drum, toner board, developer, web -under 200 k, the rest are more than 500 k. Think that here is the problem, but i do not know wich part counter is responsable and can not reset all counters to 0.
If you have any ideea.
I have not auto toner suply. What i have notice and done:
- door sensor is OK
- in output: i have give SW 1- OK- the toner bottle is turning OK
SW 56-OK- the toner suply motor turns OK
- all the tests are OK-cartridge, gamma 1 and 2, laser and autodensity are OK
- developer, drum -OK - 100 k
There are no codes or warnings.
There are no codes or warnings. Simply the toner bottle doesnt start automaticaly to make the toner suply.
In counters> except drum, toner board, developer, web -under 200 k, the rest are more than 500 k. Think that here is the problem, but i do not know wich part counter is responsable and can not reset all counters to 0.
If you have any ideea.