If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have minolta di520 machine which shows add toner message.the toner bottle is half .
.i put the toner in tank by hand but it still shows add toner message.
Make sure the back cover is on properly. There is a sensor in the bottom left corner that needs to be covered. If it isn't covered the only symptom seems to be a false message saying to add toner.
yes the message i fake .the problem is with the ram on the upper righ of machine with cell.when i change it the problem was fixed.
I'm interested in how this turned out, but sorry, I don't understand the answer. Can you re-phrase? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
just for another possible future solution, i remember in the toner hopper there is an arm (for toner level detection) with a magnet on it. the magnet used to get developer on it and weigh it down so it always looked for more toner.
although this instance may have been solved electronically, its another simple thing to check before replacing parts.
We know a thing or two because we've seen a thing or two.
The medication helps though...
Comment