Working on this Bizhub 652 and it will print fine but copies are soming out skewed on the glass and with the ADF I made adjustments to the Skew screw on the back right of the adf to see if it would help but made no difference. How to I go about fixing this when its copying from the glass crooked? Not to sure what to do saw some adjustments on the scanner but didnt want to mess it up more. Thanks
-
-
Re: Skewed Copies Bizub 652
Before you do any more adjustments, it might be a good idea to determine if it's a paper skew or an optical skew.
Start by printing a document and measure to find if the printed imaged is skewed.
If yes, It's either a paper skew or a laser adjustment.
If no, then the problem is optical.
A common cause for paper skew is heavy buildup of toner on the fuser inlet guides. =^..^=
EDIT: I just looked at your attachment. It looks like there is some paper skew, and a worse optical skew. Since both the OC and ADF images are skewed, I would suspect the the scanner frame has been bent down by leaning on it. Are you familiar with the Ricoh Bear Hug? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Skewed Copies Bizub 652
No not familiar with the Ricoh Bear Hug? you thinking that its the frame is actually bent thenComment
-
Re: Skewed Copies Bizub 652
I'd call it the scanner housing, and yes.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment