C224 Shuts itself down..

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TechTim
    • May 2025
    #1

    [Misc] C224 Shuts itself down..

    C224
    If you ask for a engine print or copy the device shutsdown and main power has to be cycled to get the device back up again.. No errors in the history.Device only has 70k on the clock. Have tried everything from settings and parts replacement still the same.. Parts that have been replaced as follows in this order..and made no difference at all.Device does not reboot just shuts off.

    HDD
    Main pwb
    SSD(sent back to Konica)
    LVPS
    HVPS
    Prcb
    Thanks

    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22936
      #2
      Re: C224 Shuts itself down..

      The HDD and SSD would have been my first attempts. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • myster
          Technician

          50+ Posts
          • Oct 2011
          • 79
          #3
          Re: C224 Shuts itself down..

          Scan fine?

            Comment

            • allan
              RTFM!!

              5,000+ Posts
              • Apr 2010
              • 5459
              #4
              Re: C224 Shuts itself down..

              sorry disregard my post.
              Whatever

                Comment

                • Tech Helpdesk
                  Trusted Tech

                  100+ Posts
                  • Jul 2015
                  • 112
                  #5
                  Re: C224 Shuts itself down..

                  Originally posted by TechTim
                  C224
                  If you ask for a engine print or copy the device shutsdown and main power has to be cycled to get the device back up again.. No errors in the history.Device only has 70k on the clock. Have tried everything from settings and parts replacement still the same.. Parts that have been replaced as follows in this order..and made no difference at all.Device does not reboot just shuts off.

                  HDD
                  Main pwb
                  SSD(sent back to Konica)
                  LVPS
                  HVPS
                  Prcb
                  Thanks

                  Turn off the HDD and check the power supply settings.
                  Attached Files

                    Comment

                    • REGSIS
                      Trusted Tech

                      250+ Posts
                      • May 2016
                      • 434
                      #6
                      Re: C224 Shuts itself down..

                      Originally posted by TechTim
                      C224
                      If you ask for a engine print or copy the device shutsdown and main power has to be cycled to get the device back up again.. No errors in the history.Device only has 70k on the clock. Have tried everything from settings and parts replacement still the same.. Parts that have been replaced as follows in this order..and made no difference at all.Device does not reboot just shuts off.

                      HDD
                      Main pwb
                      SSD(sent back to Konica)
                      LVPS
                      HVPS
                      Prcb
                      Thanks

                      Sounds like prcb to me at firs, but also rings like power supply unit.

                        Comment

                        Previous template Next
                        Working...