bizhub 350 SNMP Communication Failed

[rover_mdw]

I've been searching the Internet, but I can't find anything.

We've got a problem with out bizhub. It tells us

"SNMP Communication Failed"

The bizhub is situated in our network and we're usually use ipp to send our print jobs. Since yesterday there is a SNMP Communication Failure. We tried to print via IP but the failure is still the same.

Is it possible to reset the failure and does anyone knows how to avoid this failure.

Thanks for any idea and answer

[pepper38_cnd]

Just disable the SNMP on the machine and in your driver, and everything should be fine.