C2060 with 300gr paper...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • topimpress
    Technician
    • Jul 2017
    • 17
    #1

    C2060 with 300gr paper...

    hi,
    i have a new accuriopress c2060 and i have this problem when i print on 300gr width paper. on 130gr its normal.. any body know this prob
    thx
    Attached Files
    Tags: None
    • copytechman
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2008
      • 915
      #2
      Re: C2060 with 300gr paper...

      Originally posted by topimpress
      hi,
      i have a new accuriopress c2060 and i have this problem when i print on 300gr width paper. on 130gr its normal.. any body know this prob
      thx

      Dev units, check them for voiding, all of em

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22744
          #3
          Re: C2060 with 300gr paper...

          I think it's pretty obvious that it's the magenta developing unit. Yellow + magenta = red. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • copytechman
              Senior Tech

              Site Contributor
              500+ Posts
              • Nov 2008
              • 915
              #4
              Re: C2060 with 300gr paper...

              Originally posted by blackcat4866
              I think it's pretty obvious that it's the magenta developing unit. Yellow + magenta = red. =^..^=
              I would agree, I had a c1060 do that exact symptom but it was the yellow Dev in that case on a pretty new piece of gear.

              Regards!

              A.

                Comment

                • topimpress
                  Technician
                  • Jul 2017
                  • 17
                  #5
                  Re: C2060 with 300gr paper...

                  but why on 135gr the result is perfect...???

                    Comment

                    • Phil-Davies
                      Junior Member
                      • Jul 2017
                      • 5
                      #6
                      Re: C2060 with 300gr paper...

                      Have you set the correct papeweight into the machine as the image looks unfused.

                        Comment

                        • copytechman
                          Senior Tech

                          Site Contributor
                          500+ Posts
                          • Nov 2008
                          • 915
                          #7
                          Re: C2060 with 300gr paper...

                          Originally posted by Phil-Davies
                          Have you set the correct papeweight into the machine as the image looks unfused.
                          The machine uses different belt / Dev speeds based on weight. The heavier the stock, the slower the speed, at lower speeds the Dev doesn't fill the mag roller effectively if low on Dev.

                          Regards

                            Comment

                            Previous template Next
                            Working...