toner-end Magenta

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • harfan
    Junior Member
    • Sep 2009
    • 9

    [Error Code] toner-end Magenta

    I have a Ineo+224e with a toner M problem,
    after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
    does not work?help please.
  • rrrohan
    Service Manager

    Site Contributor
    1,000+ Posts
    • Sep 2011
    • 1971

    #2
    Re: toner-end Magenta

    Originally posted by harfan
    I have a Ineo+224e with a toner M problem,
    after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
    does not work?help please.


    but if it thinks you have no toner its normally because the sub toner hopper isnt being supplied toner from bottle and if you keep printing like you are you may end up with TCR error.
    Check toner bottle is rotating. mark it with a perm marker or somthing. if thats spinning your hopper may be buggered

    Comment

    • jamesyboy
      toner monkey

      100+ Posts
      • Jul 2010
      • 188

      #3
      Re: toner-end Magenta

      such errors are usually caused by the front bushing of the toner hoper getting bunged up : easy repair take off covers to reveal toner hopers clean end bushes , machines work ok if the bushing is removed , konica have upgraded the part due to these problems

      Comment

      • harfan
        Junior Member
        • Sep 2009
        • 9

        #4
        Re: toner-end Magenta

        Originally posted by jamesyboy
        such errors are usually caused by the front bushing of the toner hoper getting bunged up : easy repair take off covers to reveal toner hopers clean end bushes , machines work ok if the bushing is removed , konica have upgraded the part due to these problems
        I put on new bushings ,that solved the problem.

        Comment

        Working...