toner-end Magenta

[harfan]

Re: toner-end Magenta

such errors are usually caused by the front bushing of the toner hoper getting bunged up : easy repair take off covers to reveal toner hopers clean end bushes , machines work ok if the bushing is removed , konica have upgraded the part due to these problems

I put on new bushings ,that solved the problem.

[jamesyboy]

Re: toner-end Magenta

such errors are usually caused by the front bushing of the toner hoper getting bunged up : easy repair take off covers to reveal toner hopers clean end bushes , machines work ok if the bushing is removed , konica have upgraded the part due to these problems

[rrrohan]

Re: toner-end Magenta

I have a Ineo+224e with a toner M problem,
after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
does not work?help please.

but if it thinks you have no toner its normally because the sub toner hopper isnt being supplied toner from bottle and if you keep printing like you are you may end up with TCR error.
Check toner bottle is rotating. mark it with a perm marker or somthing. if thats spinning your hopper may be buggered

[harfan]

I have a Ineo+224e with a toner M problem,
after 15 prints in only M color ,machine stops and comes with a toner-end,new bottle
does not work?help please.