[Misc] C1060 PLEASE WAIT HDD INITIAZING and IC-602 CONTROLLER NOT CONNECTED

[byronf]

Currently having issues on a c1060 with IC-602 that comes up with PLEASE WAIT HDD INITIAZING, INTITIAL CONTROLLER UNCONNECTED, the machine then goes into a frozen state.When disabling the hdds machine will boot up without freezing but copies are very faint.I have loaded firmware,tried to force format HDD and still no luck. NB: When HDD's are on the machine freezes in approximately 10secs

[byronf]

Re: C1060 PLEASE WAIT HDD INITIAZING and IC-602 CONTROLLER NOT CONNECTED

Hi Gents,

This issue has been resolved after replacing the NVRAM.