-
-
Re: BHC353 C-2253
On end of life list June 2017. Not sure how difficult it would be to get to the motor as I've not had to mess with that one yet although I've changed out numerous main motors.
I used to slightly slide out he IUs whenever removing the belt but stopped that years ago when I noticed it doesn't make any difference for clearance. Sounds like you're on the right track since the code wasn't there prior to the fuser failure.Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22. -
Re: BHC353 C-2253
Can you manually spin the IU's ?? Then re-seat try again.Comment
-
Re: BHC353 C-2253
mo0651 & srvctec,
Thank you for your suggestions. As it turned out the yellow drum unit was bound up
probably due to a piece of rubber from the fuser. I replaced that and check the machine.
The drum drive turned OK but the developer drive was very very stiff. Had to use trouble reset
to get it to come back to life. After that,
iIt ran OK, but the transfer belt cleaning did not fix the smears it had to be replaced.
After that, everything fell back into place.
Thanks again
DRComment
Comment