If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pagescope utility is the only way. The export/import function will not export the password in the of SMB or FTP scanning. The file will be saved as a tab delimited text file. This can be open in Excel, or most any other spreadsheet, and edited very easily. Remove all info not needed. You can input the password at this time and import the passwords, again it just will not export the passwords.
The Pagescope Enterprise Suite I believe has the ability to copy the address book from one machine to another through the network. Both machines and the computer running the software must be on the same network. The base component of the software is free. It does take a little time to get it up and running properly, but can save some time when there is a lot of machines to be changed at the same time.
If you set SW 72 to HEX 04 you then get the option in admin settings to import/export the address book using a usb flash drive, you have the option to choose what you want to import/export.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
Comment