Fiery on 1070

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • swaggen
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2017
    • 100
    #1

    Fiery on 1070

    I took delivery on a 1070 press.

    Im having a challenge with the fiery and getting it on line with the Work Station. I have updated all the settings in admin , nic to be in range for my network. Nothing,

    1) Can I use the older work stations or do I need the current version. I have Version 5 I believe running a c6500

    2) I dont need a Fiery Controller for what I do. Can I go usb direct? and if so is there any setting needed to adjusted for this.

    I have a tech coming but he is a few days out. 4 Hours on this and I would like to run the thing until a tech can get here.
    Tags: fiery, setting, tech, version, work
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22747
      #2
      Re: Fiery on 1070

      I see a couple of machines regularly that put up a real fight every time the machine must be shut down. My suggestion is to shut down the MFP completely. Power down the Fiery. Wait a few minutes, Power up the Fiery (wait until you see the (00) display). Power up the MFP completely (Ready). Click the Connect button on the Fiery Workstation. It usually connects within 3 minutes (if it's going to). =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...