Konica Biz Hub 600 LCD display very dark, everything is in ? Chinese & no service mod

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tonerjockey
    Senior Tech

    500+ Posts
    • Apr 2014
    • 534

    Konica Biz Hub 600 LCD display very dark, everything is in ? Chinese & no service mod

    Hi guys. on this biz hub 600, i need a flashlight to read the display. everything appears to be in Chinese. i cant enter service mode. the touch screen or hard buttons might work one time after a reboot, but then nothing changes. also, if its the date i see, than it is at 00/01/06, telling me that either the backup battery went bad, of ? maybe a hard drive crash??

    can anyone tell me what might be the cause or what to look for?

    i appreciate any input. thank you, Jim
Working...