C368 line in image (only) on scanning

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jorvikps
    replied
    Re: C368 line in image (only) on scanning

    Thanks. I'll try a re-clean. If not back to the drawing board.

    Leave a comment:


  • REGSIS
    replied
    Re: C368 line in image (only) on scanning

    Originally posted by Jorvikps
    Hi,

    Got a really odd one here.

    Scanning into PC and there is a line on the image areas only. Scan in a white sheet of paper no line. See image attached (the line just above left head). Starts and stops at the end of an image area.

    Any help would be greatly appreciated. Tried cleaning all mirrors etc.

    Thanks

    Andy
    You've missed a spot. Clean it again.

    Leave a comment:


  • darry1322
    replied
    Re: C368 line in image (only) on scanning

    Originally posted by allan
    Looks like there is light getting in there. The document feeder is to high on one side i would guess. Or is it the same if you make a copy of the glass with a backing. Scan only the 4mm border is not cut out like with copies.

    I think OP is referring to the light line above the head of the left most person, not the shaded line at the top. Looks like something in the optics or on the white reference sheet.

    Leave a comment:


  • allan
    replied
    Re: C368 line in image (only) on scanning

    Looks like there is light getting in there. The document feeder is to high on one side i would guess. Or is it the same if you make a copy of the glass with a backing. Scan only the 4mm border is not cut out like with copies.

    Leave a comment:


  • Jorvikps
    started a topic C368 line in image (only) on scanning

    C368 line in image (only) on scanning

    Hi,

    Got a really odd one here.

    Scanning into PC and there is a line on the image areas only. Scan in a white sheet of paper no line. See image attached (the line just above left head). Starts and stops at the end of an image area.

    Any help would be greatly appreciated. Tried cleaning all mirrors etc.

    Thanks

    Andy
    Attached Files
Working...