FS-534 jamming

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4213
    #1

    FS-534 jamming

    Intermittent jams. Fine when going onto top tray. From what I see on bottom tray the joggers aren't opening all the way. Strange thing is they open fine and all good when copying, they just don't open far enough (need to open about an inch more) when printing. Checked the settings for printing, first thing came to mind was it was set for a little smaller paper like Eur A4 or something. Also is fine if you select staple from print driver. Just plain printing has the issue of joggers not opening far enough.

    If I didn't see it myself I wouldn't believe it. What could be different printing and copying using the finisher.
    Tags: copying, fine, open, printing
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22698
      #2
      Re: FS-534 jamming

      jam code?

      FS-534 alignment plate wearing.
      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4213
          #3
          Re: FS-534 jamming

          Hey BC, some interesting stuff. I read a lot of it and will check it out further when I have a little more time.

          Any idea why it only does it when printing? Like I posted copying is fine from same paper drawer, etc. Also if they select stapling when printing the joggers open up all the way fine.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22698
              #4
              Re: FS-534 jamming

              Anecdotally I've hear from endusers the printing is more of a problem, but from what I've seen myself, it affects anything fed to the stapling tray. Additionally, the front-to-back positioning of the paper in each tray can make a difference ... but is not any kind of a solution. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...