Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

[wjurls]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

I would not even consider touching a C1085, or C1100 (Or any production color machine) without a service manual at your disposal. There are many procedures that are critical to carry out following component replacements.

Lee

[blackcat4866]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

If you're going to install those maintenance parts you're probably going to need the service manual to run the simulations. Or is this just speculation about possibly buying parts? =^..^=

[allan]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

From a service point of view the 1100 is an awesome machine.
Very easy to get around.
Its a real machine not a toy.

[davidj7]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

Unless someone will give you a cost calculation spreadsheet with all the info.

Thanks for the info

[allan]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

Unless someone will give you a cost calculation spreadsheet with all the info.

[davidj7]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

So I need to have the full service and parts manual and not just few pages?

[allan]

Re: Konica Minolta bizhub C1085 & Pro1100 maintenance/parts replacement schedule

Its part of the service manuals and even the parts manual.

[davidj7]

Hi,
I am looking for the maintenance /parts replacement schedule of Konica Minolta bizhub C1085 and Pro1100 something like Xerox HFSI list .Like part A has to be replaced after 100000 A4 prints etc.

Please P.M me if you can share.

many thanks
David