Re: Bizhub 808
Better yet, Start a new thread with your problem in the KM forum where all the KM techs will see it. https://www.copytechnet.com/forums/konica-minolta/
Bizhub 808
Collapse
X
-
Re: Bizhub 808
Washed out prints:Enter Service mode Image Process adjustment preform initialize + Image stabilization adjustment,Then gradation adjustments is what worked for me.Leave a comment:
-
-
Re: Bizhub 808
Did you get the grey copies figured out just ran into the same issue.Leave a comment:
-
Bizhub 808
I have a rash of BH 808 with very light copies!I tried DV,drum ,transfer. firmware HV1 ect.OH IDC senor. Called Konica..anyone have this problem please Help!
Sent from my SM-N950U using TapatalkTags: None
Leave a comment: