BIZHUB C452 FIRM WARE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Riviera
    Technician

    Site Contributor
    50+ Posts
    • Sep 2016
    • 66
    #1

    BIZHUB C452 FIRM WARE

    Im getting l 1 l 2 and l3 code
    e after setting soft switch 51 and 55 to extend drum life. The imaging units do not have chips in them or the wiring to connect them too .I assume they are original? Can some one help out with firmware ?
    Tags: chiops, imaging, original, units, wiring
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 7931
      #2
      Re: BIZHUB C452 FIRM WARE

      Originally posted by Riviera
      Im getting l 1 l 2 and l3 code
      e after setting soft switch 51 and 55 to extend drum life. The imaging units do not have chips in them or the wiring to connect them too .I assume they are original? Can some one help out with firmware ?
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • Riviera
          Technician

          Site Contributor
          50+ Posts
          • Sep 2016
          • 66
          #3
          Re: BIZHUB C452 FIRM WARE

          How do I reset drum count? I have the chips but there is no wiring in imaging unit to plug them into?

            Comment

            • copier tech
              Field Supervisor

              5,000+ Posts
              • Jan 2014
              • 7931
              #4
              Re: BIZHUB C452 FIRM WARE

              Originally posted by Riviera
              How do I reset drum count? I have the chips but there is no wiring in imaging unit to plug them into?
              Don't waste your money on the chips.

              Simply change SW 51 & 55 & you wont get anymore "replace xxxxx" message

              You may need a firmware update but only once.

              But as you now have the chips, take the front cover off the image unit you will see the little PCB/Chip.
              Let us eat, drink, and be merry, because tomorrow we may die!

              For all your firmware & service manual needs please visit us at:

              www.copierfirmware.co.uk - www.printerfirmware.co.uk
              ​

                Comment

                • Riviera
                  Technician

                  Site Contributor
                  50+ Posts
                  • Sep 2016
                  • 66
                  #5
                  Re: BIZHUB C452 FIRM WARE

                  Originally posted by Riviera
                  How do I reset drum count? I have the chips but there is no wiring in imaging unit to plug them into?

                    Comment

                    • Riviera
                      Technician

                      Site Contributor
                      50+ Posts
                      • Sep 2016
                      • 66
                      #6
                      Re: BIZHUB C452 FIRM WARE

                      i meant a wire with a connector

                        Comment

                        • Riviera
                          Technician

                          Site Contributor
                          50+ Posts
                          • Sep 2016
                          • 66
                          #7
                          Re: BIZHUB C452 FIRM WARE

                          Originally posted by copier tech
                          Don't waste your money on the chips.

                          Simply change SW 51 & 55 & you wont get anymore "replace xxxxx" message

                          You may need a firmware update but only once.

                          But as you now have the chips, take the front cover off the image unit you will see the little PCB/Chip.

                            Comment

                            • Riviera
                              Technician

                              Site Contributor
                              50+ Posts
                              • Sep 2016
                              • 66
                              #8
                              Re: BIZHUB C452 FIRM WARE

                              Originally posted by copier tech
                              Don't waste your money on the chips.

                              Simply change SW 51 & 55 & you wont get anymore "replace xxxxx" message

                              You may need a firmware update but only once.

                              But as you now have the chips, take the front cover off the image unit you will see the little PCB/Chip.

                                Comment

                                • escalante
                                  Trusted Tech

                                  100+ Posts
                                  • Sep 2018
                                  • 115
                                  #9
                                  Re: BIZHUB C452 FIRM WARE

                                  Good night.
                                  Tell you that a customer has a Bizhub C452 that does not carry chips. Only replaces cylinder and developer. But he did not give that unit anymore, and he had to change a half-use image unit that carries chips. The problem was that code C2553 started to come out and the solution was to change the chips. I sent you a picture of the wiring.


                                  https://www.google.com/amp/s/m.es.al...824651262.htmlrBVaSVvQCNaALJ9IAAB67A77yOo956.jpg

                                  Enviado desde mi SM-J701M mediante Tapatalk

                                    Comment

                                    Previous template Next
                                    Working...