C360 freezes up when attached to network cable.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JimmyT
    Junior Member
    • Apr 2019
    • 7

    [Misc] C360 freezes up when attached to network cable.

    Hello everyone,

    So few months ago I have this C360 where it freezes up after I plugged in network cable. It usually takes around 5 - 10minutes.

    It basically display main copy screen, and no buttons or touch screen is functioning.

    also when the network cable is disconnected, it functions with no problem at all.

    Originally I thought there is something wrong with the access point connected to the machine, so I exchanged that. It worked, until last Friday.

    Any idea? The machine had been running for 2 years with no issue until now. If anything, there is a change in machine physical location when the problem first pops up.
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22653

    #2
    Re: C360 freezes up when attached to network cable.

    Very likely, some kind of non-print data is hitting your printers IP. The hard part is that is nearly impossible to find the source ... literally anywhere on the network. The simplest solution is to change the printers IP address, then one at a time change the port at each print driver. The data that is offending your C360 will still be out there, but it won't matter, since it's not coming to the printer. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5445

      #3
      Re: C360 freezes up when attached to network cable.

      Also try changing network speed setting from auto to 100mbs.
      Connect a laptop to it and check.
      Have had switches that would cause KM machines to lock up.
      Whatever

      Comment

      • copier tech
        Field Supervisor

        5,000+ Posts
        • Jan 2014
        • 7876

        #4
        Re: C360 freezes up when attached to network cable.

        Is the copier on DHCP or static?
        Let us eat, drink, and be merry, because tomorrow we may die!

        For all your firmware & service manual needs please visit us at:

        www.copierfirmware.co.uk - www.printerfirmware.co.uk

        Comment

        • BaconSteve
          Trusted Tech

          100+ Posts
          • Apr 2019
          • 140

          #5

          Comment

          • allan
            RTFM!!

            5,000+ Posts
            • Apr 2010
            • 5445

            #6
            Re: C360 freezes up when attached to network cable.

            Mmm that explains some of my previous problems i had.
            So would it not help to simply cut the fly lead wires that goes to pin 4 and 5 on the RJ-45 connector?
            Whatever

            Comment

            • BaconSteve
              Trusted Tech

              100+ Posts
              • Apr 2019
              • 140

              #7

              Comment

              • Terna247
                Technician

                50+ Posts
                • Jan 2019
                • 64

                #8
                Re: C360 freezes up when attached to network cable.

                Seen that before, replaced the modules(memory) and was good. Try that.

                Comment

                • JimmyT
                  Junior Member
                  • Apr 2019
                  • 7

                  #9
                  Re: C360 freezes up when attached to network cable.

                  Hi everyone,

                  Apologies for the late (rather very late) reply. Turns out after I have replaced with a Wifi access point (which acts as wireless client for the machine) and a network cable. The problem seem to have go away by itself, as so far the machine has yet to freeze up any more

                  Edit: I've also replaced the power cord as well though I'm not sure if it's related.

                  Comment

                  Working...