Hello. Copier C287 showed the codes С9402, С6751, СFА17, С40С5. We replaced CCD and performed Firmware Update , but we get codes СFА17, С40С5 (for example ,when resizing a copy). This copier does not have HDD and network connection.We will be grateful for any advice. Thanks.
-
-
Re: С 287 , codes C FA17, C 40C5
After replacing the CCD Unit, it must be calibrated, did you do it?A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused. -
Re: С 287 , codes C FA17, C 40C5
are you saying the hdd is missing and the network port is dead? this comes with hdd. did you use w4 firmware and special. also run the self diagnostic. but mfp could be friedComment
-
Re: С 287 , codes C FA17, C 40C5
Change of flat cable and for the case of C-FA17 & C-40C5 do different firmware version update.Comment
-
Re: С 287 , codes C FA17, C 40C5
Hi,
Change flat cable no.6 A7AHN12V01.
If you haven't done this repair previously you might aswell order x2 A7AHM90000 incase the locks break.
Screenshot_20220701-173337_Chrome.jpgComment
Comment