Good day, please help. See attached image. When printing business cards on 300gsm stock the colour registration is off. The first page that prints is not bad but from the second print onwards the magenta is out at the top 1/3 of the page and the black is out towards the bottom 1/3. The technicians replaced the registration unit, image units, sensors and everything else that they could think of and it is still doing the same. To eliminate CorelDraw issues, I even printed from word and it does the same. There is no issue when printing on normal paper (80gsm). I have been printing these cards on various c452's for the past 4 years but on this c652 I have this issue. The technician says they tested it on other machines at their office and it does the same. If this is true, it should be an issue world wide, which I doubt?
C652 Colour registration issue
Collapse
X
-
Re: C652 Colour registration issue
Good day, please help. See attached image. When printing business cards on 300gsm stock the colour registration is off. The first page that prints is not bad but from the second print onwards the magenta is out at the top 1/3 of the page and the black is out towards the bottom 1/3. The technicians replaced the registration unit, image units, sensors and everything else that they could think of and it is still doing the same. To eliminate CorelDraw issues, I even printed from word and it does the same. There is no issue when printing on normal paper (80gsm). I have been printing these cards on various c452's for the past 4 years but on this c652 I have this issue. The technician says they tested it on other machines at their office and it does the same. If this is true, it should be an issue world wide, which I doubt?
What is the counter on?Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Comment
Comment