unable to ping and pr1nt (posted on behalf of copiernerd)

[slimslob]

Re: unable to ping and pr1nt (posted on behalf of copiernerd)

Thank you very much for posting this thread on my behalf. I have been told this before but i forgot.

Well. I would like to thank all the experts for sharing their experiences and suggestions.
I have initialized Network settings from Service Mode.
Mac binding is not done. There are other two printers working beside. If i plug cable of this machine into another printer and assign the same IP address manually then it prints and ping. But if i plug other printer's cable into this machine with their different IP, this damn MFP do not print and ping. This is quite strange. It means there is no mac binding no network securities involved.

If IEEE 802.11 is enabled in User Tools, it will prevent the network jack from working. IEEE 802.11 is only used when Ricoh's POS internal wireless is used or when certain high security authentication is utilized. In either it turns off normal operation of the network jack.