Got a client of mine that has an old Konica 7050. Machine that was in storage. They got it out and fired it up. It's coming up with a Error Code P71 - Connect Finisher.
Is this an easy fix? And if it is a matter of clearing the code does anyone have the SIMMS sequence to get into the Service Mode and what are to clear codes?
It isn't a machine I normally work on but I told them I'd do what I could. Any assistance would be appreciated.
Is this an easy fix? And if it is a matter of clearing the code does anyone have the SIMMS sequence to get into the Service Mode and what are to clear codes?
It isn't a machine I normally work on but I told them I'd do what I could. Any assistance would be appreciated.