- Machine 1- Konica Minolta C253 with the following options:
Standard Emperon controller with built in Networking/I- fax/Scanning.
Scan Accelerator board
Encryption kit
Finisher FS-519 with optional tray
Two Position Saddlestitch Stapler with half fold/center fold and corner stapling
(SD-505)
Hole punch kit (2 or 3 hole)
Two Drawer stand
Work table
Enhance kit installed (used for option boards)
4 New Imaging units installed
Fuser 40% life
Transfer belt - 40% life.
Copy count: 255,000
- Machine 2- KonicaMinolta C353 MFP (new out of box, just set up):
Standard Emperon controller with built in Networking/I-fax/Scanning.
Encryption kit
Finisher FS-519
Two Position Saddlestitch Stapler with half fold/center fold and corner stapling (SD505)
Hole punch kit (2 or 3 hole)
Two Drawer stand
Work table
4 New Imaging units installed
Fuser - New
Transfer belt - New.
- Machine 3- KonicaMinolta C352 with the following options:
Encryption kit
Scan accelerator board
Standard Emperon controller with built in Networking-Scanning
Enhance kit installed (used for option boards)
Fuser: 25%life
Transfer belt: 85% life
Toner: 25%
Page count: 115,000
- One FS-609 Finisher:
Relay unit and all mounting hardware included. Removed from machine with 3,000 copies on meter.
8050 toner
black 87pcs. $27.45
cyan 80pcs. $41.60
magenta 80pcs. $41.60
yellow 80pcs. $41.60
8020 toner
black 74pcs. $17.60
cyan 74pcs. $23.65
magenta 74pcs. $23.65
yellow 74pcs. $23.65
We have many other toners and drums for different Konica Minolta machines. Give me a call:
1-888-306-0406 ext:221
Albert