AccurioPress C6100

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bluebear
    Technician
    • Jul 2014
    • 16

    AccurioPress C6100

    Hi Gent,

    I have this error code C2237 come up on Accurio Press C6100, can someone help interpret this or advise how to resolve the issue please?

    Thank you
  • Toxic
    Senior Tech

    500+ Posts
    • Dec 2009
    • 690

    #2
    Re: AccurioPress C6100

    It should be this.

    The IDC shutter home
    sensor (PS19) does not
    become active after a
    specified period of time
    elapses since the IDC
    shutter motor (M36)
    becomes active.

    Open front door,pull out process unit,remove transfer belt.
    Below drum k is IDC sensors located,check sensor shutter plate is it moving freely left and right,clean shutter home sensor.
    If not familiar with this machine better call some CE before you make more possible damage.

    Comment

    • bluebear
      Technician
      • Jul 2014
      • 16

      #3
      Re: AccurioPress C6100

      Many thanks for the feedback, I will work above procedure on Monday and feedback.
      Much appreciate your enormous help.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22666

        #4
        Re: AccurioPress C6100

        If its anything like the C1060 you may find that the shutter does not open quite far enough. It's a very simple mechanism made of sheet metal, and it only took a little tweaking to make the shutter open more fully when actuated. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • bluebear
          Technician
          • Jul 2014
          • 16

          #5
          Re: AccurioPress C6100

          I have carefully followed procedure above, it seem there is no power coming to the motor (IDC shutter motor) hence shutter is not does not open and shutter properly.Error code has also changed from C2237 to C2236 reboot.

          Planning to replace motor, anyone has the part number please?

          Many thanks to all, much appricate.

          Comment

          • Toxic
            Senior Tech

            500+ Posts
            • Dec 2009
            • 690

            #6

            Comment

            Working...