Konica Software Switch settings (complete)

[jotunn]

Re: Konica Software Switch settings (complete)

where did you find that info?
in a bulletin? i hate giving incomplete advice when i dont have/know all the sources of info.

PM

[Synthohol]

Re: Konica Software Switch settings (complete)

Software SW No.219 0x08: Support for DHCP option 81

• DHCP option 81RFC4702

where did you find that info?
in a bulletin? i hate giving incomplete advice when i dont have/know all the sources of info.

[rrrohan]

Re: Konica Software Switch settings (complete)

Ok thanks, yes it's a DNS issue regarding email only working on IP not hostname so the advise makes sense

Sent from my Pixel 4 XL using Tapatalk

[jotunn]

Re: Konica Software Switch settings (complete)

Software SW No.219 0x08: Support for DHCP option 81

• DHCP option 81RFC4702

[Synthohol]

Re: Konica Software Switch settings (complete)

Software SW No.219 0x00: SMB1.0/2.0 are available. (default)
Software SW No.219 0x04: Only SMB2.0 is available.
change ntlm to smb 2 as well.

hex 08 is not a valid option.

[rrrohan]

Re: Konica Software Switch settings (complete)

KM support told me to use hex 08 for a fault but didnt say what it did. hex def goes past 04 consider function versions goes as far as B0

[tmmdmmm]

Re: Konica Software Switch settings (complete)

What's switch 219 hex 08 do?

Sent from my Pixel 4 XL using Tapatalk

Is there even a hex 08? All I know of is 00/04

[rrrohan]

Re: Konica Software Switch settings (complete)

What's switch 219 hex 08 do?

Sent from my Pixel 4 XL using Tapatalk

[Gaffers01]

Re: Konica Software Switch settings (complete)

Just had a second-hand C308, that every time I did anything in the Utility Mode I had to put the admin password in and after some digging came across this.


Password Protect The Utility Button

It is now possible to password protect the Utility Button on the Main Screen of the MFP.

This is useful in Multi User Environments to prevent unauthorised access to Utility, User Settings, Device Information, One Touch/ User Box Registration, Consumable Life, Banner Printing, Remote Panel Operation and so on.

With this set, the User will be prompted for a password when pressing the Utility Button - (The Password is the same as the Password used to access the Admin Mode).

Setting Procedure:

Access Tech Rep / System 2 / Software SW Setting:

Password protect access to Utility mode.
Software SW No.200 Hex 00 : Disabled (default)
Software SW No.200 Hex 20 : Enabled

This SW is available for the following models:

• All A3 "E series" devices (Must be on latest Firmware and Function Version)
• All A3 7 and 8 Series Devices

**Note - None e series devices are NOT supported**


Related Topic: Password protect the User Settings Menu
Should you wish to just protect the User Settings Menu, this can be done by setting SW 71 to Hex 08

[zeke]

Re: Konica Software Switch settings (complete)

It is my understanding that there is now no All Active Solutions for the current models. Konica has discontinued that and just relies on Tech bulletins and Knowledgebase.

If you ever need the older All Active Solutions stuff just PM me and I will be glad to send you a download link.

Thanks for the input guys..keep it coming and I will add it to the list..see updated list with your inputs below:

Konica Software Switch Settings


10 Hex 02 makes a generic (Muratec) a Konica important so drivers can pick up all device options
12 Addition of Authentication Device
25 FW Version Function Setting
33 Renders some functions which were available when both administrator authentication and key counter were provided with when using the vendor , available only with admin authentication
49 Upper limit of copies that can be input through the control panel setting
51 Settings for Life warning/replace display of units
69 When printing using manual bypass in custom size allows for printing only with a print driver ------- settings
70 Alarm sound and screen display for communication errors due to CSRC causes
71 Hide color copy option
72 Import/Export function of the address book through usb memory
121 Operation when a double feed is detected when adf is used
124 Function to restrict the file type of TX fax
135 Setting for the ID length of the HID Prox card
143 Expansion setting of the touch panel sensitive area when web browser function is used
145 Switching to auto detection for paper size in manual bypass tray
146 Setting for enabling use of non image area erase ,centering, and original size when book original is used in fax/scan mode
151 Setting for displaying or hiding the near empty display time
152 The email body print settings of the email RX print
155 Validation/invalidation of the debug setting of the log
157 Low Power Mode Settings
159 Hex 08 keeps SSD from going to sleep causing freezing issues
163 Setting for the auto execution of self diagnosis (full)
172 Hex 05 hide marketplace App
192 Sets whether to enable Android or iOS function
203 Setting to automatically change login authorization to a second user when the second user
attempts card authentication after a first user has been authenticated through card authentication
206 Setting whether to enable coverage counter
227 Setting for the display of consumable level and warning (Operatino panel,PSWC,Fiery)
230 Setting for the display of consumable level and warning (PSES,MIB,PrintFleet,SiteAudit)

i never gave you this, here is a exert from the service Manuel for software switches and what they do (hopefully file attached)

[tsbservice]

Re: Konica Software Switch settings (complete)

I haven't seen these in the UK for donkeys years, anyone know if they're still available here.....and whereabouts they are...

Those are available in NA area, you should have MKM account not Infohub, Knova etc.

[kingarthur]

Re: Konica Software Switch settings (complete)

I can confirm they are still going strong in the US anyway. Just looked up a random model from each of the series over the last few years, and found an All Solutions file for each model I looked up: C552, 232, C224e, C258, C659, and a C300i. All of them looked as if they had been updated within the last couple weeks, most were within the last week.

I haven't seen these in the UK for donkeys years, anyone know if they're still available here.....and whereabouts they are...

[blazebusiness]

Re: Konica Software Switch settings (complete)

Anyone? :O)

Model number? 10 on Konicas depending on which bit switch - Hex 00 is probably to specify time zone settings and Hex 20 for how many fax reception rings before answering.

[copier tech]

Re: Konica Software Switch settings (complete)

Can we keep this thread going!?

I need to know what HEX setting for SW10 is for Olivetti ?

Anyone? :O)

[copier tech]

Re: Konica Software Switch settings (complete)

Can we keep this thread going!?

I need to know what HEX setting for SW10 is for Olivetti ?