Any compatibility between bizhub c454e and bizhub c554e fuser?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ammorex112
    Technician
    • Oct 2013
    • 13
    #1

    Any compatibility between bizhub c454e and bizhub c554e fuser?

    hello!
    i have a bizhub c554e with a fuser related error. didn't work with trouble reset, by phone.
    the copier machine is at about 250 km from my office, so i have to go there, but i do not have a c554e fuser.
    i only have at this moment a bizhub c454e fuser.
    until now i did not try to swap a c454e fuser to a c554e machine.
    are they compatible? need to change connector or something ?
    thank you!
    Tags: bizhub, c454e, c554e, fuser
    • BillyCarpenter
      Field Supervisor

      Site Contributor
      VIP Subscriber
      10,000+ Posts
      • Aug 2020
      • 14755
      #2
      Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

      Nope, won't work. The C454e is only compatible with the C454. The C554e fuser will only work in that model. At least according to Precision Roller.


      Konica Minolta bizhub C454e Fuser (Fixing) Unit- 120 Volt, Genuine (F0154)
      Adversity temporarily visits a strong man but stays with the weak for a lifetime.

        Comment

        • 3ktlc
          Trusted Tech

          Site Contributor
          100+ Posts
          • Feb 2018
          • 178
          #3
          Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

          They are not compatible.

            Comment

            • allan
              RTFM!!

              5,000+ Posts
              • Apr 2010
              • 5445
              #4
              Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

              This mistake of ordering or giving the tech the wrong fuser is super common.
              Whatever

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 7931
                  #5
                  Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

                  Originally posted by ammorex112
                  hello!
                  i have a bizhub c554e with a fuser related error. didn't work with trouble reset, by phone.
                  the copier machine is at about 250 km from my office, so i have to go there, but i do not have a c554e fuser.
                  i only have at this moment a bizhub c454e fuser.
                  until now i did not try to swap a c454e fuser to a c554e machine.
                  are they compatible? need to change connector or something ?
                  thank you!

                  What is the error? most likely you just have a piece of paper wrapped around the fuser.
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk
                  ​

                    Comment

                    • ammorex112
                      Technician
                      • Oct 2013
                      • 13
                      #6
                      Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

                      ok. thank you all ! good to know about this compatibility.

                        Comment

                        • EarthKmTech
                          Step aside, noob

                          1,000+ Posts
                          • May 2009
                          • 2142
                          #7
                          Re: Any compatibility between bizhub c454e and bizhub c554e fuser?

                          554 type is induction if i remember correctly so the whole rear side of the fuser is open for the coil to come close to the heating roller, the 454 series is the old fashioned lamp style with a closed back.

                          Never see them anymore so cant remember.

                            Comment

                            Previous template Next
                            Working...