Develop ineo +203

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • krissie
    Junior Member
    • Apr 2021
    • 4

    Develop ineo +203

    Hello guys,

    I'm new here , a technician but not trained for copiers. Still I'm trying to fix a develop ineo +203.
    The machine I'm working on does not start up at all, The power is on but only the blue, orange and start button led light up.
    I noticed voltage on the battery dropping below 2V so I fitted a new battery, checked the hdd on a windows machine and it seems to be fine. Found a thread which suggested flipping a micro switch next to the nvram, tried that too.
    What else can I do without spending a lot of money on this old machine?

    Greeting from the Netherlands
  • Synthohol
    Certified Konica Expert

    Site Contributor
    5,000+ Posts
    • Mar 2016
    • 5463

    #2
    Re: Develop ineo +203

    Sounds like a dead LCD display.
    Machine not worth the 500.00 Control panel IMHO.

    A02EM71002 is the part# I believe.
    We know a thing or two because we've seen a thing or two.
    The medication helps though...

    Comment

    • avecosat
      Trusted Tech

      250+ Posts
      • Jun 2012
      • 298

      #3
      Re: Develop ineo +203

      I had the same problem and it was a memory module

      Comment

      • krissie
        Junior Member
        • Apr 2021
        • 4

        #4
        Re: Develop ineo +203

        Originally posted by avecosat
        I had the same problem and it was a memory module
        That is worth a try.

        As soon as I found the right modules I will share results

        Comment

        • krissie
          Junior Member
          • Apr 2021
          • 4

          #5
          Re: Develop ineo +203

          Originally posted by krissie
          That is worth a try.

          As soon as I found the right modules I will share results
          Is it possible to put in bigger modules?
          I found 1 gb modules 333mhz.

          Comment

          • krissie
            Junior Member
            • Apr 2021
            • 4

            #6
            Re: Develop ineo +203

            I got new modules but the copier still doesn't work. I'll scrap it.
            Thanks for the help

            Comment

            Working...