If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
skewing and jamming caused by broken A7PU710301 guide plate. It has a very small nipple on the end that breaks off. It closes spring loaded tray 1 feed unit guide.
Today i had bizhub c308 with 32-05 but this code is in relation with the paper exit sensor.
In my case it was the exit path solenoid/ position of the reversal guide. I added a spacer.
Comment