automatic touch panel calibration

[Tiagocang]

hello, any1 know if its possible and how to do it, the automatic calibration of touch panel in C250i and C257i ?

[copier tech]

Press the home button, then accessibility you will see the touch calibration option there.

www.printerfirmware.co.uk

[Tiagocang]

Press the home button, then accessibility you will see the touch calibration option there.

www.printerfirmware.co.uk

i tried that before but when i try the calibration the left bottom i cannot make it work and i saw a video with automatic calibration with usb like FW update

[kingarthur]

I'm not sure if this applies to the iSeries, i've got a note on my phone on how to carry out screen calibration - go to "Counter", "Display Keyboard" "Stop" "Clear" "1166" "Start" - then it says "Reboot after 30 seconds", whether the device reboots, or you have to, I can't remember

[tsbservice]

Tiagocang , check your PM

[Woxner]

[Ziggy]

Put usb stick in that has firmware on it and hold the bottom button on back of control panel instead of the top button. That should automatically launch the touch panel calibration