Konica Minolta bizhub C224e replace MFP board

[copier tech]

Re: Konica Minolta bizhub C224e replace MFP board

www.copierfirmware.co.uk


Copier tech will help you

Thanks, see attached procedure.

Precedure to fit a used MFP board Revision 6.pdf

[Arko289]

Re: Konica Minolta bizhub C224e replace MFP board

Good morning. What firmware version do you need?

Enviado desde mi Infinix X692 mediante Tapatalk

The last one, I don't know which one was on the device because the motherboard was damaged. It is important that it works on bizhub c224e

[escalante]

Re: Konica Minolta bizhub C224e replace MFP board

Thank you.
Where I can find firmware?
Already have Reset tool

Good morning. What firmware version do you need?

Enviado desde mi Infinix X692 mediante Tapatalk

[avecosat]

Re: Konica Minolta bizhub C224e replace MFP board

www.copierfirmware.co.uk


Copier tech will help you

[Arko289]

Re: Konica Minolta bizhub C224e replace MFP board

Thank you.
Where I can find firmware?
Already have Reset tool

[tsbservice]

Re: Konica Minolta bizhub C224e replace MFP board

You will need FW and Reset tool PLUS following the exact procedure.

[Arko289]

Greeting. The old MFP board was damaged and I bought a used one. Do i have to put firmware in it or just install it in the device? The SSD and print control board remains old.

Konica Minolta bizhubC224e

Thanks