Getting drum error indicators (usually open/close front cover & notice goes off). Also print jobs have been noticeably printing slower (this issue may be network related). And lastly prints are curling. Any suggestions greatly appreciated.
-
-
Remove & clean all drum contacts.
Update the firmware & function version.
Curling pints is usually caused by damp / poor quality paper / high humid environment.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Check your TCR values. In Load check verify toner addition.Comment
-
Does the machine have a finisher / job sorter, or just an output tray? If Output tray, does it have the correct output tray? It's not the same as the 36 page/minute and slower i-machines. The 45 page/minute and up requires the OT-513. If you have the correct output tray or a job sorter, there are some "service only" replacement parts for the exit unit if curling is still a problem.
If you have a finisher, there is nothing I know to help with that other than use quality paper.
See attached.A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...Comment
Comment