BH-C-284e, SMB scanning, here we go again....
Collapse
X
-
Leave a comment:
-
thumb_55736.jpg
Scan to SMBv1 on C-284e is alwys possible only SMBv2 needs a firmware, but it's in the meantime old, too.Attached FilesLeave a comment:
-
If they are already on, toggle the HTTP server off and then back on. Then reboot the copier with the gray switch.Leave a comment:
-
Is PSWC and HTTP server turned on in admin mode?
BTW, It was working before FW update. Did not make any adjustments to the system.
HansLeave a comment:
-
Leave a comment:
-
Its giving an 503 error with the information that the website is “not secure”
It is doing it with all browsers. 😠
Machine is otherwise working normal except scanning of course since I cannot enter the scan target.
HansLeave a comment:
-
We have had 107 errors quite a few times and the downgrading, adjusting SSW, then upgrading has resolved the issue several times.
Leave a comment:
-
Do you get anything in a web browser? Is it just an error about unable to connect or a white screen?Leave a comment:
-
SIGH........
After updating with A5C10Y0-F000-GDU-M1.exe the web interface of the machine is no longer accesible.
Neither Firefox nor Chrome nor Edge will work!
Any ideas please
HansLeave a comment:
-
Yes. Update the firmware and make sure you are on function version 7 (dip switch 25 to hex 60).Leave a comment:
Leave a comment: