Konica C364e scanner green stripes

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ferro10
    replied
    Update

    I confirm that the problem has been resolved by replacing the CCD

    Leave a comment:


  • blackcat4866
    replied
    On machines with high scan volume and very large packets, it's common for CCD failures and intermittent codes C9401, across multiple machine series'.

    Leave a comment:


  • myster
    replied

    Good morning.
    We had a similar problem on a c652. In the morning the "first hour" failed, the rest of the day it worked fine.
    If it was turned off at night the next morning it would happen again
    We solved it by changing the ccd unit


    Leave a comment:


  • Woxner
    replied
    if it clears up just replace ccd. have had many do this. keep it simple. it cant be mirrors so dont piss with them

    Leave a comment:


  • Synthohol
    replied
    ok so likely ccd related then or mirrors could be slightly out of place.
    you could reseat all the cables, ribbons on both ends but dont touch red screws.
    just for giggles, run background data reset and stabilize, then stabilize in gradations and perform all the adjustments (3 each) and see if the result changes.
    that test wont require a screwdriver

    Leave a comment:


  • ferro10
    replied
    Originally posted by Synthohol
    are you scanning through the feeder or off the platen glass?
    That test is done with feeder. The customer confirms me that the glass scan also comes with the same defect.

    Leave a comment:


  • Synthohol
    replied
    are you scanning through the feeder or off the platen glass?

    Leave a comment:


  • ferro10
    replied
    Originally posted by Synthohol
    are scans off the glass different?
    they are different as documents
    Or do you mean something else?

    Leave a comment:


  • Synthohol
    replied
    are scans off the glass different?

    Leave a comment:


  • ferro10
    started a topic Konica C364e scanner green stripes

    Konica C364e scanner green stripes

    Hi everyone

    A client of mine reports that in the morning the first scans come out with green lines then after about 10 scan works the problem disappears.
    I thought of a CCD problem or of a connection cable do you have other possible solutions?

    defect in the attachment Green squares are only for privacy

    PS: the printer is in the office so not in an too cold environment.
    Attached Files
Working...