Bizhub 458e

[rrrohan]

Re: Bizhub 458e

It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=

yeah i always just do the assy

[blackcat4866]

Re: Bizhub 458e

It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=

[antone]

Re: Bizhub 458e

Think the fuser drive is bad

Sent from my SM-N981U using Tapatalk

[antone]

Re: Bizhub 458e

Fuser drive....must be a tough 2 replace ( ^^) cat

Sent from my SM-N981U using Tapatalk

[blackcat4866]

Re: Bizhub 458e

That's it right there:

Exit photointerrupter or flag
Exit clutch.

I've changed a lot of both. =^..^=

[Woxner]

Re: Bizhub 458e

If the exit sensor does not work replace the clutch on fuser drive or the fuser drive assy.

[tsbservice]

Re: Bizhub 458e

I would try new paper exit sensor, spring and flag.
Make sure registration section isn't binding.

[antone]

Jam code 3003 ...1 or 2 copies out jams and folds entering fuser ! Replaced fuser ect

Sent from my SM-N981U using Tapatalk