Bizhub 458e

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • antone
    Trusted Tech

    250+ Posts
    • Oct 2014
    • 344

    Bizhub 458e

    Jam code 3003 ...1 or 2 copies out jams and folds entering fuser ! Replaced fuser ect

    Sent from my SM-N981U using Tapatalk
  • tsbservice
    Field tech

    Site Contributor
    5,000+ Posts
    • May 2007
    • 7627

    #2
    Re: Bizhub 458e

    I would try new paper exit sensor, spring and flag.
    Make sure registration section isn't binding.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    Comment

    • Woxner
      Senior Tech

      500+ Posts
      • Jul 2011
      • 807

      #3
      Re: Bizhub 458e

      If the exit sensor does not work replace the clutch on fuser drive or the fuser drive assy.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22692

        #4
        Re: Bizhub 458e

        That's it right there:

        Exit photointerrupter or flag
        Exit clutch.

        I've changed a lot of both. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • antone
          Trusted Tech

          250+ Posts
          • Oct 2014
          • 344

          #5
          Re: Bizhub 458e

          Fuser drive....must be a tough 2 replace ( ^^) cat

          Sent from my SM-N981U using Tapatalk

          Comment

          • antone
            Trusted Tech

            250+ Posts
            • Oct 2014
            • 344

            #6
            Re: Bizhub 458e

            Think the fuser drive is bad

            Sent from my SM-N981U using Tapatalk

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22692

              #7
              Re: Bizhub 458e

              It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=
              Last edited by blackcat4866; 10-25-2021, 02:00 AM.
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

              Comment

              • rrrohan
                Service Manager

                Site Contributor
                1,000+ Posts
                • Sep 2011
                • 1971

                #8
                Re: Bizhub 458e

                Originally posted by blackcat4866
                It's similar to the bizhub 554e ... just more things to remove from the rear. I assisted another tech changing the exit clutch a few months ago. 2 hours. =^..^=
                yeah i always just do the assy

                Comment

                Working...