ineo e364+ toner reset

[The 101]

Hello everyone,
I have a Develop (Minolta) ineo +364e here, and it works really well.
Now, I’ve replaced the toner, but the display still shows the old fill levels.
Is there a way to reset this?
On the internet, I only find reset chips, but the toner cartridges don’t have a chip; they’re just plastic tubes.
Do any of you have an idea or some good advice?

Thanks in advance!

[tsbservice]

It is like that because you are shaking empty bottles. Don't worry it will work even it says 2% all the time as long as there's toner powder in bottle.
There is a trick to remove bottle and make a lot of full color pages until it ask for toner then put full bottle in but it's not really necessary.

[copier tech]

Hello everyone,
I have a Develop (Minolta) ineo +364e here, and it works really well.
Now, I’ve replaced the toner, but the display still shows the old fill levels.
Is there a way to reset this?
On the internet, I only find reset chips, but the toner cartridges don’t have a chip; they’re just plastic tubes.
Do any of you have an idea or some good advice?

Thanks in advance!

Take all the toners out, store in a safe place & carry on using the printer as normal.
Eventually when it prompts you to replace a toner fit the color back it's asking for, this will reset the toner 'gas gauge' for that colour.

[FalconTech]

I need a firmware for a C360 to resolve a C-C153 error. Can anyone help? Please send to rawlcoulton@hotmail.com.