i-Series-machines 45ppm and faster can only use Dual-ADF. Can't be changed in service mode.
Slower machines have per default no ADF configured. You cen tell tham to no ADF, Duplex-ADF or Dual-ADF.
-
[QUOTE=tsbservice;n1606528]You don't have to tell bh301i doesn't have DF as it's an option. I think they(KM) put DF by default on machines 45+ppm.[/that makes sense. I had a bizhub 454 to put a reversiing doc feeder on it I had to remove a board I think since it was all ready for a single scan feeder.. thanks!Leave a comment:
-
You don't have to tell bh301i doesn't have DF as it's an option. I think they(KM) put DF by default on machines 45+ppm.Leave a comment:
-
-
disable adf in service mode?
worst thing they get is a message adf not available?
just my .02
Leave a comment:
-
the oc 511 fits I had a new one in box. in the back. I just don't know n ow if I need to tell the machine it doesnt have a d oc feeder or not lol
thanks all
brentLeave a comment:
-
While it doesn't show up in the accessories images in the configuration book, it does list it in there. It is the OC-511. Not sure what the actual part number is for ordering though.Leave a comment:
-
flat top options bizhub 301i konica minolta
so I have lots of grocery stores that I have contracts with. for years we could use a bizhub 287 with flat top even 368 and 368e. flat top. now I am a dealer and looking on the new price sheets etc it does not show the option for one.. believe it or not customer prefers not havin the doc feeder as they say.. more things for the customer to touch. any thoughts? since I have lots of copiers and options I just took the kit off a 368e flat top kit and it sits too far to the right lol the old kits had a mylar that could cover the slit glass screen as well just was wondering if anyone had to come up with a solution like this. thanks
brent
Leave a comment: