C-5109 Can't print multiple pages

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Toummer
    Junior Member
    • May 2022
    • 8
    #1

    C-5109 Can't print multiple pages

    I can't more than 2-4 pages at a time on my C6100. Every time I try I get a C-5109 call service error message. This happens are any size paper I try and use.
    I found that it means a problem with the centering sensor on my PF-707m. I've cleaned the sensor. I also ran an IO check 18-01. I got the result 65535 which is abnormal.
    Is there anything else I should try before taking it apart to check the wiring?
    Tags: c-5109, check, pages, sensor, time
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5431
      #2
      Re: C-5109 Can't print multiple pages

      why check the wiring yet, id just change ps40
      search the part# of ps40 and see if there is another one somewhere on the machine or the 707m you can just swap it and see if trouble follows the sensor.
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22688
          #3
          Re: C-5109 Can't print multiple pages

          IIRC there is a calibration for that sensor also. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • Toummer
              Junior Member
              • May 2022
              • 8
              #4
              Re: C-5109 Can't print multiple pages

              Originally posted by Synthohol
              why check the wiring yet, id just change ps40
              search the part# of ps40 and see if there is another one somewhere on the machine or the 707m you can just swap it and see if trouble follows the sensor.
              I found other ps40s, but they don't seem like the same part. Is there a different part number I should be looking for?

                Comment

                • lucky13
                  Trusted Tech

                  100+ Posts
                  • May 2008
                  • 125
                  #5
                  Re: C-5109 Can't print multiple pages

                  just replace the sensor there is no adjustment or calibration there is another one in duplex drop down unit not worth time and trouble to swap just replace it it is common these sensors go out

                  dip switch 26-4 to 1 disable auto centering in pf
                  until you replace sensor

                  if machine is at proper height and leveled with pf . then run auto centering each tray and adu check to see if adjusted numbers are between 0 and +- 200 if you get crazy high numbers replace centering sensor
                  Last edited by lucky13; 05-28-2022, 09:15 PM.

                    Comment

                    Previous template Next
                    Working...